Yes, we recommend you send us a photograph of the item/parts required along with the thickness of the panels.

Between Walls (Cubicles with walls to either side and the rear)

Corner Cubicles (Cubicles with a wall to one side and the rear)

Island Cubicles (Cubicles are fitted to a rear wall only)

There are other configurations such as a Corner Inline, Single Between Walls, Single Inline, Double Inline etc.

A “standard toilet cubicle” is 800mm (wide) x 1500mm (deep).

Cubicle panel height is 1800mm with 150mm ground clearance.

Yes, we can manufacture cubicles to any size. It is the buyers responsibility to ensure there is enough space and the cubicles are fit for purpose.

We supply anywhere throughout the United Kingdom

You can contact us in multiple ways to discuss your requirements.

Email: sales@dbi.co.uk

Tel: (01302) 591901

If you are unsure about what you want, we are more than happy to talk through your requirements and offer help and advice over the phone.

To provide an initial quote, the following basic information is required.

• The number of cubicles required.
• The configuration of the cubicles.
• The chosen cubicle range.
• Basic overall sizes if you have them.
• Layout drawings, even a basic drawing is beneficial.

We don’t need you to provide the sizes of every panel, we will work this out. If you are stuck just give us a call and we can talk you through things, we’re a friendly bunch and always happy to help.If you are stuck just give us a call and we can talk you through things, we’re a friendly bunch and always happy to help.

Each order comes with individual layout drawings specific to that job, drawings show all panel sizes and details required.

That depends on the board material to which the cubicles (and or other items) are manufactured from.

Solid Grade Laminate (SGL) or Compact Laminate as its commonly referred to, is the board material which is 100% waterproof. Therefore, if cubicles are manufactured in (SGL) they are waterproof.

Yes, we can manufacture cubicles to any size.

Were colours have not been stated, all quotes are based on our standard “popular colours”. These colours can be viewed in the DOWNLOAD section

Colours specified from our offering, will be stated on our quotes. If you have a specific colour requirement not shown, give us a call Tel: 01302 591901

Prior to manufacture, customers receive CAD drawing specific your order.

Drawings are based on the overall sizes you supply us, we calculate and show the sizes of the pilasters, dividers, and doors etc.

We request you check and confirm all the details and sizes etc are correct.

More complex jobs will come with elevation and cross section drawings as necessary.

Manufacture will not take place until we receive customer approval in writing.